24431
Rev. A
10/12
http: www.networketi.com
Environmental Technology, Inc.
34 of 94
Automatic Air Dehydrator
ADH
®
SIROCCO™
Instruction Manual
3.
With Sysinfo highlighted, press the middle of the rocker switch to select it.
The Sysinfo screen will be displayed. Refer to Figure 27.
Figure 27. THE SYSINFO SCREEN.
4.
On the Sysinfo screen are the Serial Number of the circuit board, as well
as the revision level of the firmware inside your unit. There is nothing on
this screen that can be changed; it is just for reference should the
information be needed. When finished viewing the information, press the
middle of the rocker switch to return to the previous screen.
5.
Now, use the lower portion of the rocker switch to scroll down to highlight
Return. Refer to Figure 28. Press the middle of the rocker switch, and the
system pressure Main screen will be displayed.
Figure 28. THE CONFIGURE SCREEN.
Firmware
SIR 1.01
Ser Num
00XX
Configur
Sysinfo
Advanced
Return
