24431
Rev. A
10/12
http: www.networketi.com
Environmental Technology, Inc.
56 of 94
Automatic Air Dehydrator
ADH
®
SIROCCO™
Instruction Manual
6.
Use the upper and lower portions of the rocker switch as arrow keys to
highlight the line displaying the desired setting. When the line you wish to
change is highlighted, press the middle of the rocker switch. The highlight
will narrow to just the actual value rather than across the entire line.
7.
At this point, use only the top of the rocker switch button to increase the
setting or the bottom of the rocker switch to decrease the setting. If you
press and hold the top or bottom part of the switch, the number will
increase or decrease automatically without having to press it once for
each number by which you want to change the setting.
NOTE
Because the pressure settings cannot overlap each other at any point, the
software has been designed to automatically help you set those values to
comply with that requirement. If you press and hold the top or the bottom
of the rocker switch to increase or decrease any value automatically, you
might notice that the numbers stop advancing, whether up or down, as
you near the allowable upper or lower range. This is done deliberately so
that the settings do not overlap. You may change more than one setting
at a time, as long as they don’t overlap. Remember, as well, that it might
be necessary to first increase the upper or to decrease the lower alarm
limit setting, respectively, before you will be able to increase or decrease
the associated high or low pressure setting.
NOTE
If you make a mistake and don’t want to keep the change(s) you just
made, scroll down to highlight the Can(cel) option at the bottom of the
screen, press the middle of the rocker switch to select it and cancel the
changes you just made, then repeat the change process.
8.
Once the configuration values have been changed as desired, use the
bottom of the rocker switch to scroll down to highlight the Keep option,
then press the middle of the rocker switch to confirm the new entries.
Refer to Figure 71. If you make a mistake and don’t want to keep the
changes you just made, scroll to the Cancel option at the bottom of the
screen, press the middle of the rocker switch to cancel, and return to the
previous screen.