24431
Rev. A
10/12
http: www.networketi.com
Environmental Technology, Inc.
70 of 94
Automatic Air Dehydrator
ADH
®
SIROCCO™
Instruction Manual
3.
On the View / Edit screen, scroll to highlight Edit Cfg, then press the
middle of the rocker switch to select it. The Function screen will appear.
Refer to Figure 98.
Figure 98. THE FUNCTION SCREEN.
4.
On the Function screen, scroll down to highlight Display and press the
middle of the rocker switch to select it. The Edit Display screen will
appear. Refer to Figure 99.
Figure 99. THE EDIT DISPLAY SCREEN.
5.
On the Edit Display screen, with Screen Saver highlighted, press the
middle of the rocker switch again to narrow the highlight to just the actual
number itself.
6.
Use the upper and lower portions of the rocker switch to increase or
decrease the setting. Allowed values are 1 to 60, in minutes. After
making the setting, press the middle of the rocker switch to select it and
the highlight will once again be on both Screen Saver lines.
NOTE
If you make a mistake and don’t want to keep the change(s) you just
made, scroll down to highlight the Can(cel) option at the bottom of the
screen, press the middle of the rocker switch to select it and cancel the
changes you just made, then repeat the change process.
Operat’n
Alarms
Display
Save Can
Screen 2
Saver(s)
Brite 10
Keep Can
Expressed
in minutes;
allowed
values are
01 to 60.
