24431
Rev. A
10/12
http: www.networketi.com
Environmental Technology, Inc.
73 of 94
Automatic Air Dehydrator
ADH
®
SIROCCO™
Instruction Manual
To change the display brightness level setting, perform the steps below.
With allowable settings from 15 at the brightest down to 2 at the dimmest, the
display screen can be configured to be brighter or dimmer, as desired. It is
advised, however, that to prolong the life of the display unit, a dimmer setting
rather than a brighter setting be used. As more light will likely be required while
actively configuring the unit, consider using a brighter setting while actually
making or changing the system settings, then turning the brightness setting back
down following configuration. This will help prolong the life of the display unit.
1.
Press and hold the middle of the rocker switch to display the Configure
screen. Refer to Figure 104.
Figure 104. THE CONFIGURE SCREEN.
2.
With Configur highlighted, press the middle of the rocker switch to select
it. The View / Edit screen will appear. Refer to Figure 105.
Figure 105. THE VIEW / EDIT SCREEN.
Configur
Sysinfo
Advanced
Return
View Cfg
Edit Cfg
Passcode
Return
