5-in-1 Remote and Receiver Manual
EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127
© Environmental Lights
3
For RGB control, connect red to R, green to G, and blue to B. The positive wire connects to the V+ terminal. Once connected, press
the switch button until the indicator light shows red.
For tunable white control, connect the warm white wires to WW and the cool white wires to CW. The positive wire connects to the V+
terminal. Once connected, press the switch button until the indicator light shows yellow.
For single color, connect each wire to a separate channel on the receiver. The positve wire connects to the V+ terminal. Once
connected, press the switch button until the indicator light shows white.
