MiniLine Dimmer
Dim-MiniLine
EnvironmentalLights.com • P: 888.880.1880 • 11235 West Bernardo Ct., Suite 102, San Diego, CA 92127
© Environmental Lights
2
Installation
1.
Connect the LED product to the LED controller. Make sure the voltage line of the LED product aligns with the voltage line of
the controller.
2.
Connect a 12 or 24VDC power supply to the input side of the controller. The power supply voltage must match the LED
product voltage
Operation
1.
The controller has a lock function and is locked upon opening. To lock or unlock the controller, press and hold the
“mode/demo” button and “color” button for 2 seconds. T
he led product will flash 3 times confirming that you
locked/unlocked the controller setting.
2.
There are 2 control modes: Static and Dynamic. Access Static mode by pressing “LIGHT”. Access Dynamic mode by pressing
the “MODE” button.
a.
Static mode with 10 brightness settings. Adjust the br
ightness up by pressing the “LIGHT” button. Adjust the
brightness down by pressing the “SPEED” button.
b.
Dynamic mode. Cycle through 8 dynamic
sequences by pressing the “MODE” button. Adjust the speed of sequence
by pressing “SPEED” button.
1
random blink
2
blink flash
3
random fade
4
fade on fade off
5
fade on fade low
6
standard flash
7
slow flash
8
short delay flash
