Copyright EnvironmentalLights.com
All Rights Reserved 10/1/18
4
Operation
Navigation Buttons:
•
The “M” key is used to cycle through the different menu options. The currently selected
option will blink.
•
The up and down arrow keys enter the selected submenu or adjust the selected parameter.
•
Use the “M” button to select the desired setting, use the arrows to change the value then
press the “M” key again to save the setting and move on.
•
To deactivate the internal buzzer, select SYSTM
→
BUZZER
→
OFF
Main Screen:
The main screen is displayed by exiting the top level menu. This screen displays current DMX
values, the DMX resolution and the gamma curve setting.
DMX Address:
Change the DMX starting address right in the top-level menu (press any key from the main
screen or screen saver). With the DMX value selected, use the arrow keys to adjust the address.
Holding down one of the arrows will speed through addresses.
