11235 West Bernardo Court, Suite 102
San Diego, CA 92127
888-880-1880
Fax: 707-281-0567
EnvironmentalLights.com
Copyright EnvironmentalLights.com
All Rights Reserved 10/1/18
StudioPro 5 Channel DMX Digital Decoder
- 8A per Channel
Part number:
DMX-5-8A
The StudioPro 5 Channel DMX Digital Decoder - 8A per Channel is a five channel DMX
controller with RDM compatibility and a wide array of configuration options. It accepts 12-24V
DC input voltage range at eight amps per channel maximum current and can support a wide
variety of LED installations. The digital display allows for easy configuration of the DMX
address, number of output channels, PWM frequency, bit-rate and dimming curve. DMX
connection options include 5-pin XLR, RJ45 and terminal blocks for input and output.
Features
•
Digital readout legibly displays the DMX address, which is useful in dimly lit rooms.
•
Easily change DMX address without DIP switch math.
•
PWM frequency is adjustable from 500Hz to 30kHz for flicker-free performance in any
application.
•
Switchable output smoothing, 8-bit or 16-bit.
•
Adjustable number of output channels. See page 3.
•
Configurable DMX modes, including 8/16-bit inputs and master controls. See pages 4-5.
•
12-24V DC input range.
•
High 5 x 8A current capacity means it can drive up to 480W/960W per receiver at
12V/24V respectively.
•
Adjustable dimming curve for a best fit for your application.
•
Uses 5-pin XLR, RJ45 and terminal block connectors for DMX communication.
•
Mounting tabs are integrated into the rugged chassis.
