11235 W est Bernardo Court, Suite 102
San Diego, CA 92127
888-880-1880
Fax: 707-281-0567
EnvironmentalLights.com
Copyright EnvironmentalLights.com
All Rights Reserved 10/20/13
RGB LED Touch Controller
(Remote Control-1 Zone) - 12 or 24 VDC
Part No. RGB1
The RGB LED Touch Controller (
) is an easy way to mix colors seamlessly in real-time,
using any 12 or 24 volt RGB LED product. Customize the color of your RGB LED product by
simply touching the color wheel. Apply the correct DC voltage to the inputs and the controller
will generate pulse dimming signals on three separate output channels (red, green and blue).
Output is 12 or 24 VDC, matching the driver you use. Pre-programmed with 11 modes, this three
channel RGB LED Touch Controller is ready to use.
Features
RF hand-held remote controller lets you select operating modes and custom colors:
Touch sensitive color wheel allows real-time custom control of colors. Simply touch the
desired color on the color wheel and your RGB LED lights will sync to match the color.
11 pre-programed modes:
o
Static red, green, yellow, blue, magenta, cyan, and white.
o
RGB color change mode.
o
Seven color change mode (red, green, yellow, blue, magenta, cyan, and white).
o
RGB color fade mode.
o
Seven color fade mode (red, green, yellow, blue, magenta, cyan, and white).
Remote controller works through walls. Over 100 foot range in benign electromagnetic
environment.
High output frequency enables a large color spectrum and pulse width modulation
dimming.
Power off memory function.
