Copyright EnvironmentalLights.com
All Rights Reserved 12/13/18
3
Assembly and Installation
1.
Be sure to mount the Super Flat Rope Light correctly, as illustrated by figures 1-4.
2.
Super Flat Rope Light can be cut every six or ten LEDs, depending on the color, at
specific cut points. Dotted lines on the back side of the rope indicate where cuts can be
made. Be sure your cut is a straight line, perpendicular to the rope light, as shown below.
Minumum Cut Length for Whites, Green, Blue, Pink:
100mm (3.94”)
Red, Orange, Amber:
167mm (6.57”)
