3
Copyright EnvironmentalLights.com
All Rights Reserved 8/26/15
2.
In the ScanLibrary section, open the “generic” folder and select “rgb” (for any pixel or
standard RGB LEDs). Click “Patch” to add an RGB device to the DMX universe. You
will need a separate RGB device for each pixel or RGB strip (after you add one, you can
select it, press Ctrl+C, then hold Ctrl+V to fill in the entire universe). Click “OK” to
accept.
3.
The devices will be added to the “groups” area in the top right corner. Use the tools in
the “groups” window to change the orientation of the devices to better match your actual
setup. Select the devices that you want to control, which could be all of them or a subset.
