Copyright EnvironmentalLights.com
All Rights Reserved 10/20/15
4
Plug-In Power Adapter Controllers
Part Number
solar-adapt
Dimensions
104mm x 42mm x 32mm
Weight
5.3 oz [0.33 lb]
On/Off Conditions
On: Press button; Off: disconnect light strings from the
adapter (to keep memory) or unplug adapter from power
outlet (this will erase memory).
Timer
None
Button Functionality
Press the button once to turn on. Press the button to
change lighting mode.
Memory
Plays last lighting mode if power adapter stays plugged
into the outlet. To keep the memory and turn off,
disconnect light string from adapter instead of unplugging
adapter from wall.
Lifetime
2 years
Branch Length Limit
1,000 LEDs per adapter
Temperature Conditions
14˚F (-10˚C) to 140˚F (60˚C)
Weatherproofing
Waterproof / Snow-proof / Outdoor Safe
Certifications
CE Certified. Lead was not used to make these products.
Warranty
1 year seasonal use limited
Part Number
solar-adapt-ir
Dimensions
83.5mm x 38.6mm x 35.5mm (adapter)
86.3mm x 40mm x 7mm (remote)
Weight
7.10 oz [0.44 lb] (remote and remote battery included)
On/Off Conditions
On: Press ON (Remote); Off: Press OFF (Remote).
Timer
When lights are on, TIMER ON keeps lights on for 6
hours, then turns lights off for 18 hours. This timed cycle
repeats until OFF or TIMER OFF button is pressed.
Remote Working Distance
8 meters
Button Functionality (on
remote)
ON: turn lights on; OFF: turn lights off; TIMER ON starts
cycle of on for 6 hours, off for 18 hours; TIMER OFF: no
cycle, just waits for ON/OFF buttons to be pressed.
Buttons 1-8: Lighting Modes.
Memory
Adapter must remain plugged in and TIMER ON to keep
memory to play the last selected scene. If power is
disconnected to the adapter, lights revert to Mode 8.
Battery (for remote)
CR2025
Lifetime
2 years
Branch Length Limit
1,000 LEDs per adapter
Temperature Conditions
14 ˚F (-10˚C) to 140 ˚F (60 ˚C)
Weatherproofing
Waterproof / Snow-proof / Outdoor Safe
Certifications
CE Certified. Lead was not used to make these products.
Warranty
1 year seasonal use limited
