3.2.1 PRODUCT LOADING
1.
Inspect the outer packaging. If the cardboard box is too worn for use, contact Envirotainer for support.
Refer to
Fig. 3
2.
Opening the box:
2a.
Open the box and set aside the top foam.
IMPORTANT!
DO NOT DISCARD THE FOAM
2b.
Wearing safety gloves, remove the lid. Place the lid to one side, together with the tracker and probe (if
any).
DANGER!
DO NOT DISCARD THE LID
Fig. 4
3.
Loading the product:
3a.
Lift the product holder by its handle and remove it from the dewar.
3b.
Load the product into the product holder. Follow all applicable government and carrier requirements for
packaging the product.
3c.
Lift the product holder into the dewar.
→
A
C
G
0
0
0
0
7
5
3
2
B
7 (14)
Doc No:
UM-CRYO-3030
Revision:
2
State:
Released
Release Date:
2021-12-01
Approved By:
hanst
