3.2.2 SHIPPING OF LOADED PRODUCT
IMPORTANT!
After the dewar has been loaded with product and properly packaged with all required components, labels
need to be applied to the exterior of the cardboard box in accordance with government
(e.g., US DOT, EU ADR) regulations and carrier (e.g., IATA) requirements.
Please ensure that all needed documents according to the correspondent regulations are on hand (for
example shippers declaration, pro forma invoices and packing lists).
1.
Remove or cover all labels on the cardboard box:
• the label of the parcel carrier
• the dangerous goods label
(UN1845)
where you are notified as
consignee
Fig. 6
2.
Apply the labels to the exterior of the box in accordance with government regulations and carrier
requirements.
3.
Ensure that the following documents are in the folder:
• original shipper’s declaration (according to US DOT, EU ADR or IATA regulations)
• original pro-forma invoice
• original packing list
4.
Close and seal the cardboard box with a clear tape.
5.
Take necessary steps in order to inform selected carrier that the parcel is ready for pick-up.
9 (14)
Doc No:
UM-CRYO-3030
Revision:
2
State:
Released
Release Date:
2021-12-01
Approved By:
hanst
