3.2.3 PRODUCT UNLOADING
Fig. 7
1.
Unpacking:
1a.
Open the box and set aside the top foam.
IMPORTANT!
DO NOT DISCARD THE FOAM
1b.
Wearing safety gloves, remove lid. Place the lid to one side.
CAUTION!
DO NOT DISCARD THE LID
Fig. 8
2.
Unloading product:
2a.
Lift the product holder by its handle and remove it from the dewar.
2b.
Remove the product from the product holder. Store or use the product as defined by procedures.
3.
Prepare the next shipment.
• If loading new product into the dewar, follow step
3b
and onwards of the
procedure to prepare the shipment.
• If sending the CryoSure
®
system to its next destination, follow step
3c
and onwards of the
procedure to prepare the shipment.
10 (14)
Doc No:
UM-CRYO-3030
Revision:
2
State:
Released
Release Date:
2021-12-01
Approved By:
hanst
