D4K Pro® User Manual
D4K_UserManual_v1.3_EN.docx, 2021-02-12
Page 21 of 52
To set the Ad Hoc, proceed with the following steps:
1. Enter the
AdHoc
tab by tapping
Settings | AdHoc
on the screen of the Control Software.
2. The
Name
field, which is the printer’s name, is set automatically.
3. To set a password to the AdHoc, tap
Password
.
→ The following screen appears.
4. Create and type the password into the
Hotspot Password
filed, and confirm with
OK
.
NOTICE
Your password must be at least 8 characters long and must not contain the space.
7.7
Connect to the Printer via VNC Clients
WARNING!
Risk of injury!
Improper use of the remote printer control over local network using VNC software may lead to damage or injuries.
•
Use the remote printer control with great attention.
•
Do not use the remote printer control without an operator being next to printer.
•
The printer owner is responsible for any unsafe operation of the printer using the remote printer control.
7.7.1
Supported Clients for Windows
VNC Viewer
Step-by-step:
1. Download the VNC Viewer and open it.
2. Put the IP address in the VNC Server box.
3. Tap [Connect].
→ The control screen appears.
4. Proceed working on the printer.