D4K Pro® User Manual
D4K_UserManual_v1.3_EN.docx, 2021-02-12
Page 11 of 52
Hazard statements
•
H302 Harmful if swallowed.
•
H315 Causes skin irritation.
•
H317 May cause an allergic skin reaction.
•
H318 Causes serious eye damage.
•
H319 Causes serious eye irritation.
•
H332 Harmful if inhaled.
•
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
•
H335 May cause respiratory irritation.
•
H360f May damage the unborn child. Suspected of damaging fertility.
•
H361f Suspected of damaging fertility.
•
H373 May cause damage to organs through prolonged or repeated exposure.
•
H412 Harmful to aquatic life with long lasting effects.
•
H413 May cause long-lasting harmful effects to aquatic life.
Other hazards:
•
Polymerization with heat evolution may occur in the presence of radical forming substances (e.g. peroxides), reducing
substances or heavy metal ions.
•
People who suffer from skins problems, asthma, allergies, chronic or recurring respiratory illnesses must not be
deployed in processes, which use this substance. Process vapors can irritate airways, skin and eyes.
Precautionary statements
•
P101 If medical advice is needed, have product container or label at hand.
•
P102 Keep out of reach of children.
•
P201 Obtain special instructions before use.
•
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
•
P264 Wash thoroughly after handling.
•
P270 Do not eat, drink or smoke when using this product.
•
P271 Use only outdoors or in a well-ventilated area.
•
P273 Avoid release to the environment.
•
P280 Wear protective gloves/protective clothing/eye protection.
•
P302+P352 If on skin: Wash with water and soap.
•
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing.
•
P308+P313 If exposed or concerned: Get medical advice/attention.
•
P404 Store in a closed container.
•
P405 Store locked up.
•
P501 Dispose of contents and container in accordance with local regulation.
IMPORTANT
Do not use other materials than the photopolymers delivered by EnvisionTEC.
Read the relevant Material Safety Data Sheets supplied with the photopolymers before use.
Those components of the photopolymers delivered by EnvisionTEC that have been classified as hazardous do not have a
threshold limit value (TLV). Therefore, it is not necessary to give concrete instructions concerning the TLV.
IMPORTANT
Make sure that the extraction is sufficient. EnvisionTEC recommends an air change of 25 m³/h per m² effective
surface of the laboratory as described in EN 13779.
3.6
Obligations of the Printer Owner
The printer has been produced for commercial use. Therefore:
•
ensure that all general safety regulations and codes of practice as well as the safety measures described in this manual
are observed at all times;
•
observe all environmental regulations when disposing any of the components or consumables;
•
make sure that the Material Safety Data Sheets for the materials used are observed and kept in proximity to the printer.
3.7
Obligations of the Personnel
Before starting to work, anyone involved in working with/on the printer is obliged:
•
to comply with the basic workplace safety instructions and accident prevention regulations.
•
to read and follow the safety information chapter and the safety instructions in this instruction manual.