D4K Pro® User Manual
D4K_UserManual_v1.3_EN.docx, 2021-02-12
Page 9 of 52
3
General Safety Instructions
3.1
Intended Use
The printers of the D4K® line are designed to produce small, premium components requiring a high level of precision. The printers
work with industrial UV LEDs as light source.
It is the printer owner’s responsibility to ensure that the printer is used for the intended purpose and within its limitations only.
This includes that the electrical requirements indicated in chapter
and on the rating plate of the printer must not
be exceeded.
3.2
Reasonably Foreseeable Misuse
IMPORTANT
The printer may only be used for the intended purposes.
The printer may only be operated if in a flawless state in terms of technical safety.
Only then the operational safety of the printer is guaranteed!
Any other use than that defined in section
or which goes beyond that use is considered misuse!
Reasonably foreseeable misuse is e.g.:
•
Operating the printer with inappropriate materials
•
Exceeding the technical values specified for normal operation
•
Operating the printer with damaged printer parts or electric cables
•
Unauthorized modifications and changes to the printer
For any damage resulting from misuse:
•
The printer owner bears the sole responsibility.
•
The manufacturer assumes no liability whatsoever.
Modifications or Changes
Unauthorized modifications or changes will result in the warranty being null and void.
Therefore, do not make any alterations or complements to the printer without previous consultation and written confirmation of the
manufacturer.
Spare and wear parts as well as auxiliary materials
The use of spare and wear parts from third party manufacturers can lead to risks. Only use original parts or parts released by the
manufacturer.
The manufacturer shall accept no liability for damage caused by the use of unreleased spare and wear parts or auxiliary materials
not released by the manufacturer.
3.3
Risks in Handling the Printer
Operating the printer may cause risks
•
to the health and safety of the operator or third persons;
•
to the printer and
•
to other goods.
Knowledge of the safety information and user information of this instruction manual is a basic requirement for safe handling and
fault-free printer operation.
IMPORTANT!
This instruction manual must always be kept where the printer is operated! This instruction manual must be easily
accessible for operators and maintenance personnel.
Furthermore, observe:
•
general and local regulations pertaining to accident prevention and environmental protection;
•
the information contained in the supplied Safety Data Sheets.
3.4
Residual Risks
The printer has been constructed according to the state-of-the art and the approved safety regulations. Nevertheless, the operation
of the printer can cause especially the following risks to the health and safety of the operator or third persons.
Mechanical hazards
•
Risk of hand crushing caused by automatically moving printer parts.