ENVISION GLASSES
ENVISIONER’S GUIDE
17
Once you have held the power button down for 6 seconds, it will take about a
minute for the device to boot up; there is no audio cue during this process. You will
know the Envision Glasses are on when they speak out the start screen, which says
“Go to EnvisionGlasses.com.”
If the Envision Glasses are not turning on, check to see if there is no battery left and
charge them if needed.
3.5 Pair Envision Glasses with the app
Your Envision Glasses are powered on and will speak out: “Go to
EnvisionGlasses.com.” This means the device is on, but not yet paired with a phone.
To start pairing your Envision Glasses with your Envision app, complete the
following steps:
1. Open the Envision app.
2. Navigate to the ‘Glasses’ tab.
3. Click on ‘Start Pairing’. A pop-up will appear.
4. Click on ‘Start Pairing Process’.
5. Complete the steps shown on the app, which include pairing and connecting
to a Wi-Fi network.
6. Once done, click on Finish setup.
7. Switch to your Envision Glasses, where the gestures training tutorial will
start.
