ENVISION GLASSES
ENVISIONER’S GUIDE
31
Note: We recommend using the QR code method as it’s the most reliable way to
connect to a hotspot on iOS.
Hotspot on Android:
To turn on your hotspot on an Android phone, complete the following steps:
1. Go to Settings.
2. Go to Network & Internet (in some Android phones, you might have to go to
More). If you have a Samsung, you can skip to Step 3.
3. Go to Hotspot & Tethering (if you can’t find it, check the More subsection).
4. Go to Portable Wi-Fi Hotspot.
5. Go to Set up Wi-Fi Hotspot (sometimes also Configure Mobile Hotspot).
6. Choose your network name and password. This is the password that you
will enter to connect to the hotspot.
7. Connect to your hotspot the way you would to a Wi-Fi network. You can
follow the same instructions shown in the above guides.
5.1.7 When the hotspot is not detected by Envision Glasses
●
Make sure to enable ‘Allow others to Join’ in your hotspot settings.
●
Make sure your mobile network provider (SIM card provider) offers the
possibility of mobile data hotspots.
●
Check the signal strength of your hotspot.
If you are still unable to connect, please do not hesitate to reach out to the Envision
Customer Care team.
5.2 Bluetooth
The Envision Glasses contain a built-in Bluetooth module. This allows the device to
connect to not only the Envision app, but to other Bluetooth devices such as
headphones and earbuds as well.
5.2.1 Connecting to Bluetooth headphones, earbuds, or speakers
1. With your Envision Glasses powered on, turn on the device you would like
to pair and ensure it is in pairing mode.
2. From the category menu of the glasses, go to ‘Device Settings’.