ENVO SNOWKART MANUAL
|
VERSION 1.1
44
7. MAINTENANCE & REPAIR
7.1. M A I NTA I N I N G PA RTS
• Your SnowKart requires regular maintenance. In this manual we provide important basic
guidelines on how to maintain and inspect your SnowKart. We cannot teach you everything
you need to know to properly inspect and service your SnowKart. That is why we repeatedly
encourage only mechanically inclined users purchase this product
• Ensure your ski is waxed and regularly inspected for cracks and other damage
• Your SnowKart should be periodically cleaned
7.2. I N C A S E O F AC C I D E NT
If you have an accident or your SnowKart falls over, your SnowKart is unsafe to ride until you
follow the instructions included in this section. Failure to follow these instructions could
lead to component or SnowKart operation failure which could lead to serious injury or death.
1. Remove the battery before performing any additional service, inspection, or maintenance
on your SnowKart. Failure to remove the battery could lead to the SnowKart turning on
unexpectedly, causing serious damage or injury
2. Read, understand and comply with the drive system user manual. Do not disassemble or
attempt to service components unless you have been advised how to do so, explicitly in writing,
by the ENVO Drive Systems
3. Check whether the snow tracks are still firmly secure
4. Check the handlebars to confirm that neither are bent or broken, and that they are level and
upright. Make sure the stem is firmly fixed by trying to turn the handlebars relative to the front
wheel. Briefly lean on the brake levers to make sure the handlebars are firmly fixed in the stem
5. Realign the components if necessary and carefully tighten the bolts to ensure reliable clamping
of the components. The maximum torque values are printed directly on the components and/or
specified in the enclosed operating instructions. If neither are available, contact ENVO support
for assistance
