Doc:
Issue
Date
Page
VLT-MAN-ESO-14650-4942
P96
24.06.2015
113 of 161
ESO, Karl-Schwarzschild-Str. 2, 85748 Garching bei München, Germany
6.7 The X-shooter pipeline
A new X-shooter pipeline >v2.5.5 will be released soon fixing some bugs and improving the
flexures correction and wavelength calibration.
The X-shooter pipeline v2.2.0 has been recently released with its REFLEX support.
With REFLEX several recipes are user-interactive with displayed plots allowing checking the
results on the fly and re-running the recipes with modified parameter values.
It is available at:
http://www.eso.org/sci/software/pipelines/
It supports both instrument modes (SLIT and IFU).
It delivers the sky subtracted or not, cosmic ray hits cleaned, flux and wavelength
calibrated 2D spectra, rectified to a regular grid in wavelength and spatial directions.
1D extracted spectra is produced whenever a bright enough object is detected. It is
also possible to specify a region where the spectra have to be located and treated.
For example, in case of 2 objects inside the slit, the extraction can be performed for
both objects using different boxes of research.
3D reconstructed data cubes will be produced for IFU data.
Additional products to verify the quality of the results and a set of Quality Control
parameters instrument health check and trend analysis.
Some of the functionalities are still in development, more information is available in the
pipeline user manual and in the website of the pipelines at:
http://www.eso.org/observing/dfo/quality/pipeline-status.html#XSHOOTER
More information on the current pipeline problems and limits is available at:
http://www.eso.org/observing/dfo/quality/XSHOOTER/pipeline/pipe_problems.html
The cookbook reduction of the data reduction with the pipeline is currently ongoing and will
be available as soon as possible at:
http://www.eso.org/sci/facilities/paranal/instruments/xshooter/doc/
Note that a cookbook is already included in the pipeline manual and in the reflex tutorial.
If you use the X-shooter pipeline to reduce the data, please cite:
Modigliani et al.