background image

4

5

NOTE: DO NOT ATTEMP TO REPAIR THE PALLET TRUCK UNLESS YOU 

ARE TRAINED AND AUTHORIZED TO DO SO. 

Front wheel assembly

6.Parts List 

No. 

Part Number

Description 

Qty. 

1

2

3

4

5

WC 02000708

WC02000707

WC02000022

WE07000004

WC02000227

WC02000286

WC 02000259

The right fork leg welded,5012(1.0t)

The left fork leg welded,5012(1.0t)

deep groove ball bearing6204

Circlip for Shaft 20,black

iron corePU wheel 

φ70×70,PU red

nylon wheelφ70×70

steering wheel axle

1

1

4

4

2

2

 

 

The forks cannot 
be descended

-

The piston rod or pump is 

deformed resulting from 
partial loading, cargo slanting
to one side or over-loading

-

The truck was stored with 

the forks raised for extended 
period of time and now it jams.

The adjusting nut or screw 

is not in correct position

-

-

-

-

Replace piston rod and/or pump

Keep the forks at the lowest 

setting while

 

Not in use, and 

keep parts lubricated.

Adjust the nut or screw at base 

of handle

Leaks

-

-

Sealing parts worn or damaged

Some parts are cracked or worn

-

Replace worn parts with new 

parts

-

Replace worn parts with new 

parts

The Forks descend 
without

 

the release 

valve activated

-

Impurities in the oil cause the 

release valve to be unable to 
close tightly

-

Some parts of the hydraulic 

system are cracked or damaged

-

Air present in the oil

-

Sealing parts worn or damaged

-

The adjusting nut or screw is 

not in the correct position

-

Replace with new oil

-

Inspect and replace with new 

parts

-

Remove the air and check for 

air leaks

-

Replace with new parts

-

Adjust the nut or screw at base

 of handle

Summary of Contents for H10J













Reviews:

Related manuals for H10J