background image

07

08

 Check of the hydraulic oil

Loosen the hydraulic oil cap, pull out the dipstick to check the oil level. Add the hydraulic oil in time to maintain the 
liquid level.

 

Check the battery

  

 Check that the battery cover is firmly fixed.

   Check the ratio of the battery electrolyte. See “Battery” for details.

   Check whether the battery electrodes are loose or damaged and timely adjusted or replaced.

6

Specific operation procedure

 Move fork arms

    When moving the fork arms, firstly operate the control handle with both hands.

    When moving direction changes, note the position of your feet.

 

Startup and travel

 Turn on the emergency stop switch.

 Turn on the key switch.

Moving the control handle right or left to control the steering: moving the control handle right will turn the truck right 
and moving the control handle left will turn the truck left.

Release the knob, then the knob will automatically return to its original position and the vehicle automatically slows 
down.

Move the control handle to vertical position or horizontal position, to brake the vehicle.

Release the control handle, and it will automatically return to the vertical position.

Push raise button or the lower button until the fork arms are at the desired height.

When approaching goods, the truck should move slowly.

Stop the vehicle directly in front of the goods.

Lower the fork arms to the lowest position. Drive the truck forwards and insert the fork arms beneath 

the pallet.

Lift the fork arms until the fork arms are firmly supporting the pallet and goods.

Reverse the truck until there is enough room to lower the fork arms.

Lower the fork arms until they are 15-20cm above the ground.

2

Steering

3

Deceleration

4

Brake

5

Raise and lower

1

Startup

6

Loading

Bra

ke 

on 

Turn the control handle toward the operator, then rotate two knobs with your thumbs. Travel speed is related to 
the margin of the rotation of the knob: the larger the margin, the higher the speed.

        Note: check the brake function of the control handle is 
normal before work.

T

ra

ve

l

B

ra

k

e

 o

n

T12 Series Electric  Stackers

Operation guide

Operation guide

Summary of Contents for T12



















Reviews: