15
3.2 Operate and run the truck
3.2.1 Preparing
Before the truck can be commissioned, operated or a load unit lifted, the driver must
ensure that there is nobody within the hazardous area.
Checks and operations to be performed before starting daily work
•
Visually inspect the entire truck (in particular wheels and load handler) for obvious
damage.
Switching on the truck
•
Open the power switch.
•
Pull out emergency stop switch.
3.2.2 Travel ,Steering,.Braking
Do not drive the truck unless the panels are closed and properly locked.
1.Traction
Set the control handle to the travel zone (M).Set the travel switch to control the driving
speed and direction.
