( 6 )
GB-6210 Manual
Name
Function
2-2-1
Nipping Time Display
Shows the length of nipping time
2-2-2
Nipping Time Control
Button
D/- button to set the length of nipping time
2-2-3
Start Lamp
This Lamp turns on when the machine is ready to bind
2-2-4
Preparation Lamp
This Lamp turns on when glue is not melted for binding
2-2-5
Auto Mode Select Button
Used to select Auto mode
2-2-6
Auto Mode Lamp
This Lamp turns on when Auto mode is selected
2-2-7
Hand Mode Select Button Used to select Hand mode
2-2-8
Hand Mode Lamp
This Lamp turns on when Hand Mode is selected
2-2-9
Stop Button
Used to stop the binding procedure at anytime
2-2-10
Stop Lamp
This Lamp turns on when the stop button is depressed
2-2-11
Step Button
The binding procedure will carry on step by step, it will
go to the next step when you press the step button.
Can be only used in hand mode.
2-2-12
Reset Lamp
This Lamp turns on when the reset button is depressed
and it turns off when reset progress is over
2-2-13
Reset Button
Used to bring back the nipper and clamper to their
home position when stop button is depressed during
binding procedure;
2-2-14
Reset (Function) Button
In Manual Mode, depress this button for 5 seconds, the
clamper will travel forward and stop at nipper position.
