Data transmission led
Connection led
Reset
Power input
HDMI input
IR blaster extension cable interface
HDMI output
2
. HDMI
E
xtender RX receiver
Specification
HDMI signal
Full compatible with HDCP
Support resolution
480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz,
720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz
Transmit distance
It extends 1080P@60Hz signal up to 300 meters in good
electric power environment.
Note: The transmission distance may vary in different
electric power environment.
Working temperature
0℃
～
60℃
Input voltage
AC 100～240V
Power consumption
TX: 7.5W; RX: 7W
Product dimension
Weight
Color
Items
Black
Enclosure material
fireproof engineering plastics
Transport protocol
HDbitT
•
Connection
•
FAQ
Q:
TV display “waiting for connection…” on the bottom right corner?
A:
Please check if the power supply of TX (sender) is well connected and the
power indicator led lights on.
Q:
TV display “Please check the TX input signal”?
A:
1) please check if there is an HDMI signal input of sender TX.
2) Try to connect the signal source directly to display device to see if there
is signal output from source device or change the signal source, HDMI
cables and try again.
•
Specification
Data transmission led
Connection led
Reset
Power input
IR receiver extension cable interface
HDMI output
Q:
Display not fluent and stable?
A:
1)
Please check if the powerline is arranged smooth and If the poweline
length is over the limitation of this product.
2)
Please check if the powerline capacity is over loaded
3)
Please check if there is electricity interruption equipment. And it is
advised to plug in wall outlet and avoid using power charger and
power adapter
.
IR remote control
Support 20~60kHz IR remote device
150(W) x 92.7(D) x 25(H) mm
*2pcs
TX: 330g RX: 316g
WARNING
LAYPEOPLE IS FORBIDDEN TO OPEN IT
One-to-One Connection
One-to-many Connection
TV
DVD
TV
Sender
Receiver
IR
OUT
IR
IN
Powerline
HDMI
cable
Sender
Receiver
Powerline
HDMI
cable
DVD
IR
OUT
TV
IR
IN
TV
TV
TV
IR
IN
IR
IN
IR
IN
Receiver
Receiver
Receiver
