Epic Fitness A30t Treadmill, Manual

14

HOW TO TURN ON THE POWER

IMPORTANT: If the treadmill has been exposed to 
cold temperatures, allow it to warm to room tem-
perature before you turn on the power. If you do 
not do this, you may damage the console display 
or other electrical components.

 Plug in the power cord (see 
page 12). Next, locate the 
power switch on the treadmill 
frame near the power cord. 
Make sure that the switch is 
in the reset position. 

 IMPORTANT: The console features a display demo 
mode, designed to be used if the treadmill is dis-
played in a store. If the displays light as soon as 
you plug in the power cord and press the power 
switch into the reset position, the demo mode is 
turned on. To turn off the demo mode, hold down 
the Stop button for a few seconds. If the displays 
remain lit, see HOW TO CHANGE CONSOLE 
SETTINGS on page 21 to turn off the demo mode.

 Next, stand on the foot 
rails of the treadmill. 
Locate the clip attached 
to the key, and slide 
the clip securely onto 
the waistband of your 
clothes. Then, insert the 
key into the console.

After a moment, the 
displays will light.

 IMPORTANT: In an emergency, 

the key can be pulled from the console, causing 
the walking belt to slow to a stop. Test the clip by 
carefully taking a few steps backward; if the key is 
not pulled from the console, adjust the position of 
the clip.

Note: The 



 rst time you insert the key into the console, 

the incline may automatically rise to the maximum 
incline level and then return to the minimum incline 
level. This will calibrate the incline of the treadmill. If 
the incline does not automatically change, 

see step 4 

at the right.

Note: The console can display speed and distance 
in either miles or kilometers. To 



 nd out which unit 

of measurement is selected or to change the unit of 
measurement, see HOW TO CHANGE CONSOLE 
SETTINGS on page 21. For simplicity, all instructions 
in this section refer to miles.

HOW TO SET UP THE CONSOLE

Before using the treadmill for the first time, set up the 
console. 

1.  Create an iFit account.

 To create an iFit account, or for more information 
about the account, go to www.iFit.com.

2.  Connect to your wireless network.

 Note: In order to download iFit workouts and use 
several other features of the console, you must be 
connected to a wireless network. See HOW TO 
CHANGE CONSOLE SETTINGS on page 21 to 
connect the console to your wireless network.

3.  Check for firmware updates. 

 See HOW TO CHANGE CONSOLE SETTINGS on 
page 21 and check for firmware updates.

 4.  Calibrate the incline.

 See the troubleshooting symptom ““The incline 
of the treadmill does not change correctly”” on 
page 26 and calibrate the incline of the treadmill if 
necessary.

 5.  Adjust the angle of the console as desired.

Adjust the angle of the console by pressing on the 
handle on the top of the console and pulling the 
console all the way toward you. Then, ease the 
console downward to the desired angle.

The console is now ready for you to begin working out. 
The following pages explain the various workouts and 
other features that the console offers.

To use the manual mode,

 see page 15. 

To use an 

onboard workout,

 see page 17. 

To use a set-a-goal 

workout,

 see page 18. 

To create a user-defined 

workout,

 see page 18. 

To use a user-defined work-

out,

 see page 19. 

To use an iFit workout,

 see page 

20. 

To change console settings, 

see page 21.

 To 

use the stereo sound system,

 see page 23.

Reset 

Key

Clip