9
4.
Orient the Center Upright (9) so the 2” Square
Inner Cap (51) is in the position shown. Attach
the Center Upright (9) to the Right and Left Bases
(1, 2) with four M10 x 70mm Bolts (57), four M10
Washers (109), and two M10 Nylon Locknuts
(111).
Do not tighten the Bolts yet.
5.
Attach the Right Upright (7) to the Right Base (1)
with two M10 x 90mm Bolts (102) and two M10
Nylon Locknuts (111).
Do not tighten the nylon
Locknuts yet.
9
4
1
2
111
111
57
109
109
57
7
5
1
111
102
51
