9
8
4
1
58
64
37
8. Orient the Upright (4) and the Upright Sleeve
(37) as shown. Slide the Upright Sleeve onto the
Upright.
Have another person hold the Upright (4) and
the Upright Sleeve (37) near the front of the
Frame (1) as shown.
Tie the lower end of the wire tie in the Upright (4)
to the Main Wire Harness (58) and to the Pulse
Wire (64) in the Frame (1).
See the inset drawing.
Pull the other end of the
wire tie until the Main Wire Harness (58) and the
Pulse Wire (64) are routed through the Upright
(4) and out of the indicated hole.
9
9.
Tip: Avoid pinching the wires.
Slide the Upright (4) onto the Frame (1). Attach
the Upright with five M10 x 25mm Screws (74);
start all five Screws, and then tighten them.
Then, slide the Upright Sleeve (37) downward
and press it onto the Right and Left Shields
(10, 11).
4
1
74
74
10, 11
37
Avoid pinching
the wires
Wire Tie
Wire Tie
4
Hole
58
64
Wire Tie
Summary of Contents for A17r Bike
Page 30: ...30 NOTES...
Page 31: ...31 NOTES...
