7
3
6
Adjustment
Holes
1
49
3. Orient the Seat Post (6) as shown.
Next, loosen the Seat Post Knob (49) a few
turns, pull the Seat Post Knob outward, and
insert the Seat Post (6) into the Frame (1).
Slide the Seat Post (6) upward or downward to
the desired position, and then release the Seat
Post Knob (49) into one of the adjustment holes
in the Seat Post.
Move the Seat Post upward
or downward slightly to make sure that the
Seat Post Knob is engaged in one of the
adjustment holes.
Then, tighten the Seat Post
Knob.
24
72
23
4. Note: It may be necessary to remove the
Adjustment Knob (not shown) from the Seat
Carriage Block (30).
Attach the Seat (23) to the Seat Carriage (24)
with four M8 x 13mm Screws (72).
Make sure
that the Seat Carriage Block (30) is inside the
Seat Carriage.
4
30
24
30
27
6
5. Set the Seat Carriage (24) on the Seat Post (6)
and hold it in place.
Insert the Adjustment Knob (27) upward into the
Seat Post (6), and tighten the Adjustment Knob
into the Seat Carriage Block (30) inside the Seat
Carriage (24).
5
