background image

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the 
lowest position. If this is not done, the treadmill may be-
come permanently damaged. Remove the key and unplug
the power cord. CAUTION: You must be able to safely lift
45 pounds (20 kg) to raise, lower, or move the treadmill. 

1. 

Hold the metal frame firmly in the location shown by
the arrow at the right. CAUTION: To decrease the pos-
sibility of injury, do not lift the frame by the plastic foot
rails. To raise the frame, bend your legs, keep your
back straight, and lift with your legs.

Raise the frame

about halfway to the vertical position. 

2. Raise the frame until the latch knob locks into the storage

position.

Make sure that the latch knob is locked in the

storage position.

To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of di-
rect sunlight. Do not leave the treadmill in the storage
position in temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL 

Before moving the treadmill, convert the treadmill to the stor-
age position as described above. 

Make sure that the latch

knob is locked in the storage position.

1. Hold the handrails and place one foot against one of the

wheels. 

2. Tilt the treadmill back until it rolls freely on the wheels.

Carefully move the treadmill to the desired location. 

Never

move the treadmill without tipping it back. To reduce
the risk of injury, use extreme caution while moving
the treadmill. Do not attempt to move the treadmill
over an uneven surface.

3. Place one foot against one of the wheels, and carefully

lower the treadmill until it is resting in the storage position.

HOW TO LOWER THE TREADMILL FOR USE

1. Hold the upper end of the treadmill with your left hand. Pull the latch knob to the left and hold it. Pivot the frame

downward and release the latch knob. Note: To release the latch knob, it may be necessary to push the frame
forward as you pull the latch knob to the left.

2.

Hold the metal frame firmly with both hands

, and lower it to the floor. 

CAUTION: To decrease the possibility

of injury, do not lower the frame by gripping only the plastic foot rails. Do not drop the frame to the floor.
Make sure to bend your legs and keep your back straight.

Wheel

Handrails

Frame

Latch Knob

Frame

21

Summary of Contents for ECTL09706.1































Reviews: