11
11. Attach the Water Bottle Holder (26) to the
Upright (2) with two M4 x 19mm Screws (57).
11
2
26
57
12. Plug the power adapter into the jack on the frame of the elliptical exerciser (see HOW TO PLUG IN THE
POWER ADAPTER on page 12).
IMPORTANT: If the elliptical exerciser has been exposed to cold tem-
peratures, allow it to warm to room temperature before plugging in the power adapter. If you do not
do this, the console displays or other electronic components may become damaged.
Make sure that all parts are properly tightened before you use the elliptical exerciser.
Note: After assem-
bly is completed, some extra parts may be left over. Place a mat beneath the elliptical exerciser to protect the
floor.