Epicureanist EP-COFCOM1, Owner'S Manual

 
TECHNICAL DATA 

Model No. 

EP-COFCOM1 

Voltage AC 

110V 

Frequency 60 

Hz 

Heating Power 

550W x 2 

Cooling Power 

90W 

Water Heating Capacity (10 liters/hr) 

194°F 

Water Cooling Capacity (2 liters/hr) 

50°F 

Drink Making Capacity (fl. oz) 

4.06-5.41 

Powder Discharge Tolerance 

5% 

Water Discharge Tolerance 

10% 

Refrigerant R134a, 

1.59oz 

Climate Class 

SN-T 

Drink Dispatching Speed 

1 cup/6 seconds 

Electrical Shock Protection 

I 

Ambient Temperature Range 

50°F-100°F 

INSTALLATION 

IMPORTANT:

 The unit should be transported carefully, right side up, without any exposure to 

moisture or rain. Always drain any water from inside the unit before transportation. 

•

Remove all packing material and tape before using your coffee maker. Check to be 
sure that the appliance is in good condition. 

•

This unit is designed for free standing installation and indoor use only. Position the unit in 

a cool, dry place. Avoid placing the unit near any source of heat or moisture. 

•

Place the appliance on a solid level surface strong enough to support it when fully 
loaded. 

•

To allow for proper circulation, the unit requires at least a 4" clearance on all sides of 

the unit. 

•

Using a water source: 

o

Use a 3 or 5 gallon water bottle. Place the bottle upside down onto the top of 

the machine to allow the water to flow into the machine. 

o

NOTE: Large water bottle is not included.  

•

Once all necessary connections have been safely made, turn the power switches on at 
the top rear of the coffee maker to test the unit. Ensure that all heating and cooling 

functions work and test the hot and cold water faucet and all indicator lights to confirm 
they are working properly. 

NOTE: To avoid damage to the machine, ensure water is properly available to hot and cold 
water faucets before powering unit on.  

5 

5