Epicureanist EP-COFCOM1, Owner'S Manual

8 

8 

CARE AND MAINTENANCE 

CLEANING 

IMPORTANT: 

Always unplug the unit before cleaning or performing maintenance. It is 

important to follow daily cleaning procedures to maintain optimum performance. All the parts 
connected or in contact with the powder should be washed and disinfected on a 

daily basis

. 

Keep the powder outlet cup dry and clean. 

1.

Cleaning and Disinfection of the Powder Container. 

a.

Take out the Powder Container and open its cover. 

b.

Pull out the Powder Mixing Wheel. 

c.

Turn the Powder Outlet Cup and remove the top cover.  

d.

Turn the black knob at the rear of the Powder Container and remove.  

e.

Pull out the gear spring. 

f.

Pull out the Powder Feeding Shaft. 

g.

Soak the dismantled components in warm water and wash them with sterilizing 
solutions until they are clean.  

h.

Dry them and replace parts in the Powder Container before placing it in its 

original position. 

2.

Dismantling and Cleaning the Interior 

a.

Turn the Powder Outlet Cup and remove it from the Powder Container. 

b.

Remove the protective cover. 

c.

Pull down the Ventilation Mouth. 

d.

Remove the Water Inlet Hopper. 

e.

Remove the Powder Mixer and all joints and couplings. 

f.

Remove the Water Receptacle by slightly pulling upward. The protective 
screen can also be removed.  

g.

Soak the parts in warm water and wash them with sterilizing solution until clean. 

h.

Dry all parts and replace them in original position.  

3.

Auto-cleaning 

a.

Press the “Cleaning” button and the cleaning light will flash.  

b.

Press the “L. Working” button if the left system is to be cleaned, or the “R. 
Working” button to clean the right system.  

c.

Press the cleaning button again once the unit stops running.  

NOTE: Place a cup under the drink faucet to collect water dispensed during the Auto-cleaning 

process. This procedure should be repeated until the water dispensed is clear. 

4.

Ventilation Fan  

a.

The exhaust fan and cover should be cleaned regularly. 

b.

Press the button downward on the fan cover and remove it. 

c.

Remove the ventilation fan from the unit. 

d.

Clean the dust off the ventilation fan with a brush or dry cloth.  

e.

Replace the ventilation fan and cover.