To get up and running with ePipe quickly, follow the four
step “Quick Setup” below.
To understand how you can use ePipe see “Using ePipe”
in the “ePipe Exposed” section of the Stallion Software &
Documentation CD-ROM.
Ê
Before you Start
Check the packing list below to ensure you have all the
correct parts (cables are color coded for identification):
Your ePipe kit should contain:
ePipe 2148 (4 port) or 2188 (8 port) unit
AC/DC power supply unit
Ethernet UTP cable
(green connector)
Two modem cables - RJ45 to DB25
(orange connector)
Console cable with DB9 connectors
(black)
RJ45 loopback adapter
(black)
Stallion Software & Documentation CD-ROM
Warranty Registration Card
Quick Setup Guide (this card)
Ë
What Else do you Need?
To connect your ePipe to an Internet Service Provider (ISP) or other network you will
need the following:
•
Personal Computer running Windows (95, 98, NT or 2000) with an Ethernet
Network Interface Card (NIC) configured and ready to go
•
One or more analog modems or ISDN Terminal Adapters (TAs)
•
Appropriate cables to connect your modem/TA to the ePipe.
(Two RJ45 to DB25 cables are included. For additional modem cables,
Stallion has a kit available.) For part numbers, other cabling requirements
and all cabling pinouts refer to the appropriate area of the CD-ROM or to
Stallion’s web site -
http://www.stallion.com/
•
One or more analog or digital (ISDN) phone lines
•
One or more accounts with an ISP for connecting to the Internet
•
(Optional) Hub or switch to connect more than eight devices to the
ePipe hub
Item # 730118 Revision 1.00
Troubleshooting
Should you experience any difficulty with your ePipe, you may want to recheck previous
steps in this Quick Setup Guide to ensure correct installation.
Each ePipe is shipped with diagnostic tools that allows you to fully test the operation of
the unit. If you experience a problem with your system or network, the diagnostics will
help enable you or your support provider to pinpoint the difficulty. Consult the ePipe
documentation for more information.
Documentation CD-ROM and Stallion Web Site
All documentation for ePipe and other products is contained in the User Documentation
area of the CD-ROM and on the Stallion web site at
http://www.stallion.com/
. A section
in this documentation is dedicated to problem determination. Please ensure these
procedures are followed before reporting a fault.
Warranty / Registration
Stallion is offering
free telephone support
for the term of ePipe’s three year limited
warranty by completing the on-line registration available from the Stallion web site at
http://www.stallion.com/
, or by mailing the completed ePipe Warranty Registration Details
form to the nearest Stallion office (see below) within 30 days of purchase. Unregistered
users may access our Technical Support Team by email only. Registered customers will also
receive the latest information on Stallion's leading-edge product developments.
Corporate Addresses
Asia/Pacific The Americas Europe / Middle East / Africa
Stallion Technologies P/L Stallion Technologies, Inc. Stallion Technologies GmbH
P.O. Box 954 2880 Research Park Drive, Suite 160Martin-Behaim-Strasse 12
Toowong QLD 4066 Soquel, CA 95073 63263 Neu-Isenburg
AUSTRALIA USA GERMANY
Tel: +61 7 3270 4242 Tel: +1 831 477 0440 Tel: +49 6102 7397-0
Tel: +61 7 3270 4243 (supp) Tel: +1 800 729 2342 (supp) Fax: +49 6102 7397-10
Fax: +61 7 3270 4245 Fax: +1 831 477 0444 Email:
euro-support@stallion.com
2148 / 2188
Quick Setup Guide
ePipe Quick Setup Guide
