AV.io 4K User Guide
Update firmware using the AV.io Config tool
Update firmware using the AV.io Config tool
From time-to-time Epiphan Video releases firmware updates for our video grabbers. If you
register your
product
and agree to be notified of product updates, you’ll receive an email when there is an AV.io 4K update
available for download.
When new firmware is available, you can load this firmware onto your AV.io 4K using the AV.io Config tool and
the steps below.
Attempting to update firmware while running virtual machines will result in firmware upgrade
failure. For updates to persist after power cycling, please allow 5 seconds before disconnecting or
restarting device.
To update firmware using the AV.io Config tool:
1. If you haven't already done so, download and install the AV.io Config tool. See
Install the AV.io Config
tool
.
2. Download the firmware update file from the Epiphan website, as described in your firmware update
notification email or discussion with your vendor.
3. Connect your AV.io 4K device to your computer, laptop or notebook.
4. Open the AV.io Config tool.
26