Pearl-2 User Guide
Stream, record, and monitor using the Dashboard
interface
The audio inputs configured on your Pearl-2 appear in the Audio inputs section of the Dashboard.
l
A
grayed-out audio source
means that the audio source is not used in any channels.
l
A
triangular warning icon
means there is a source configuration issue that needs attention. Click the
audio source name to display the warning message.
l
A
green dot
means the source is connected and the accompanying VU meter shows the audio level.
The audio VU meter uses quasi-peak ballistics with samples averaged every 10 ms. The maximum average in
each 100 ms period is displayed as a series of colored bars. The following table describes the levels at which
the meter changes from green to yellow and red.
Table 17
Audio VU meter levels
Color
Decibel range
Red
0 to -9 dBFS
Yellow
-9 to -18 dBFS
Green
-18 dBFS and lower
Show or hide video inputs in the list
You can pick which video inputs display in the Dashboard view. Just tap the
Video inputs
header and then
check the
checkbox
next to the name of each source you want showing in the Dashboard view. Tap
Save
when you're done. The Dashboard video input list updates automatically.
86
