Pearl-2 User Guide
Configure AFU to SFTP server parameters
Configure AFU to SFTP server parameters
You can automatically upload recordings to a secure FTP (SFTP) server when you select SFTP as the AFU
protocol transfer type using the Admin panel.
The following table describes the parameters to configure AFU to an SFTP server.
Table 66
SFTP Automatic Upload Configuration Parameters
Name
Description
Server
address
The IP address or fully qualified domain name of the SFTP server.
Server port
The port used by the target SFTP server. Standard port is 22.
Login
Username for the SFTP server.
Password
Password for the SFTP user.
Use temp file
Causes files to be named with .part extension on the server during active upload. When
the upload completes, the file is renamed to the appropriate extension (.mov, .mp4 or
.avi).
Prerequisites
l
Channels and recorders are already added for AFU, see
Set channels and recorders to include in AFU
.
l
AFU is enabled and the parameters configured, see
Enable AFU, schedule, and set options
Configure AFU upload to an SFTP server using the Admin panel
1. From the Automatic File Upload configuration page, select
SFTP Client
as the protocol transfer type.
437
