Pearl Nano User Guide
Resize and position items using percents or pixels
In the example, the slideshow video source is resized to 60% of the layout's width and 70% of the layout's
height (with aspect ratio maintained). (Alternatively, pixels could be used to resize the layout item in a
similar fashion.)
An important consideration when resizing layout items
Your item will resize automatically if both left and right (or top and bottom) adjustment boxes contain
values (percents or pixels) that exceed the total of 100% (if using percents), or maximum pixel count (if
using pixels) for the corresponding horizontal (or vertical) axis.
For example, if you originally set the width of an item to 50% of the layout area (or 960 pixels, assuming
your item has a maximum width of 1920 pixels in this example) with no values entered in the left and
right adjustment boxes (i.e. the left and right boxes are deselected), the item automatically centers itself
in the layout area with the left and right percents at 25% each (remember – percents are used by default
in the layout editor, even if pixels are used in adjacent boxes). Combined with the 50% (960px) width of
the image, these two 25% (480px) values total 100% (1920px) of the layout's horizontal axis.
If you instead decide to enable the left and right percent boxes and change their values to 30% each
(instead of the current 25%), then the image's width shrinks from 50% (960px) to 40% (750px) to
accommodate the change and maintain a total layout width of 100% (1920px).
211
Summary of Contents for Pearl Nano
