Pearl Nano User Guide
Configure AFU to FTP server parameters
Name
Description
Password
Password for the FTP user.
Use temp file
Causes files to be named with .part extension on the server during active upload. When
the upload completes, the file is renamed to the appropriate extension (.mov, .mp4 or
.avi).
Prerequisites
l
The channel is already added for AFU, see
Set the channel to include in AFU
l
AFU is enabled and the parameters configured, see
Enable AFU, schedule, and set options
Configure AFU upload to an FTP server using the Admin panel
1. From the Automatic File Upload configuration page, select
FTP Client
as the protocol transfer type.
2. Specify the target
Server address
. If your system is configured with DHCP or has a valid DNS
configuration (see
), you can use the server’s fully qualified domain name instead of
the IP address.
3. Specify the
Server Port
used for the target FTP server. The standard port is 21.
4. Enter the FTP account username in the
Login
field.
5. Enter the FTP account password in the
Password
field. The characters are masked with dots.
6. Select
Use temp file
to name files with a temporary filename extension (.part) on the server until
upload is complete.
7. Click
Apply
.
343
Summary of Contents for Pearl Nano
