epiphan video Pearl Nano User Manual Download | Manualshive

Page: 394 / 484

background image

Pearl Nano User Guide

Set up channel and URLs for Kaltura webcasting

events

When you create a Kaltura webcasting event on Pearl Nano, you have the option to use the primary and
backup URLs supplied by Kaltura for the stream or to choose a stream destination that is created locally
for the channel on Pearl Nano. Alternative streaming destinations must already be configured for the
channel being webcast. Select the

Auto

option to use the primary and backup URLs supplied by Kaltura.

Auto is the default setting.

When it's time for the scheduled webcasting event to start, Pearl Nano automatically sends an RTMP (or
RTMPS) stream to the primary URL associated with that event. If you've enabled the backup stream, Pearl
Nano sends an RTMP stream to both the primary URL and the secondary backup URL associated with that
event. If the primary URL stream fails for any reason, Kaltura automatically switches over to the backup
URL.

Set up the channel and URLs for scheduled webcasting events using the Admin panel

1. Login to the Admin panel as

admin

, see

Connect to Admin panel

.

2. From the Configuration menu, click

CMS

. The Content management system configuration menu

opens.

3. Under the

Live-stream event channel

section, the channel is automatically selected. No further

action is required. Optionally, you can select

None

to prevent Pearl Nano from webcasting the

channel.

4. (Optional) Select an

Ad hoc event primary stream

from the drop-down list or select

Auto

to use

the primary URL from Kaltura. If

Auto

is the only available option, then no additional streams are

configured for the channel.

5. (Optional) Check

Backup stream

and select an

Ad hoc event backup stream

from the drop-

down list. Select

Auto

to use the backup URL from Kaltura. If

Auto

is the only available option, then

no additional streams are configured for the channel.

381

«
...
392
393
394
395
396
...
»

Summary of Contents for Pearl Nano





































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Pearl Nano

Brand: Harman Kardon Pages: 6

Brand: Harman Kardon Pages: 16

Musiccenter 151 MK2

Brand: Burmester Pages: 54

SUNNY TRIPOWER STP 20000TL-30

Brand: SMA Solar Technology Pages: 50

Brand: N-Tron Pages: 2

Brand: ICP DAS USA Pages: 8

Brand: Vanner Pages: 28

WinFast Wi2000D

Brand: Leadtek Pages: 2

Brand: Love Controls Pages: 2

Brand: Planet Pages: 20

Brand: Trace Engineering Pages: 2

Brand: Growatt Pages: 25

Brand: Cobalt Digital Inc Pages: 62

Raymarine E22158

Brand: FLIR Pages: 48

Brand: Axis Pages: 64

Brand: CTC Union Pages: 2

Brand: AMV ELECTRONICA Pages: 23

Brand: Ross Pages: 62

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands