Standalone VGA Grid User Guide
Configure encoding
3. Click
Encoding
for the your channel; the encoding configuration page opens.
4. Scroll to the
Audio settings
section.
5. Ensure the
Enable audio
checkbox is checked.
6. If the default audio format AAC 44KHz, stereo, 320 Kbps is not desired, click the
Audio format
drop-
down menu to select an audio codec. A table at the end of this procedure gives details about each
option.
7. Click the
Audio channels
drop-down menu to choose mono (1 channel) or stereo (2 channels).
If desired, you can choose
Mono
to have left and right stereo channels combined and
streamed together (i.e. when listening to the streamed audio, the same blended sound will
come through both the left and right channels).
8. Select an
Audio bitrate
from the drop-down menu. The table at the end of this procedure gives some
For
stereo
audio, we recommend 256 kbps or 320 kbps.
9. If all your changes are complete, scroll to the bottom of the page and click
Apply
.
Table 17
Audio codecs and bitrate guidance
Value
Description
AAC
AAC is the default audio codec.
This codec is comparable to MP3, and may have better sound quality with a similar
bit rate. Supported values are 16, 22, 44 and 48K kHz. Most digital signals (HDMI
113
