Standalone VGA Grid User Guide
Configure HTTP and RTSP streaming ports
5. Jot down the either the
Live Broadcast
,
RTSP stream
or other web streaming address. This is the
address you can send to viewers or to create a link to your broadcast.
Users must install Bonjour Print Services on their Windows or Mac computer to access the live
Preview using the serial number.
If you're seeing URLs with serial numbers instead of IP addresses and want to change this, log into
the admin interface by IP address (instead of by Serial number/Bonjour Print Services) to see
URLs with the IP address.
Connect to the admin interface
Configure HTTP and RTSP streaming ports
For RTSP streaming the only information required to view the broadcast is the URL and the port number used
to stream the broadcast. Port numbers are also used for HTTP streaming methods such as FLV, ASF
and MPEG-TS. By default, each channel has a unique HTTP and RTSP port number. If needed, you can modify
these port numbers. Be sure to always use unique numbers for each channel.
To set the HTTP and RTSP streaming ports, follow the steps below.
1. Connect to the admin interface using your preferred connection mechanism. See
2. Login as admin.
3. From the web interface, click a
Channel
; the menu expands.
4. Click
Streaming
; the channel's Streaming page opens.
152
