Standalone VGA Grid User Guide
Stream content using UPnP
Viewing with UPnP
Using a software or hardware media player, you can browse for files or streams with Universal Plug and Play
(UPnP). UPnP uses MPEG-TS over HTTP with the H.264 codec and MP3 or AAC audio encoding (or no audio).
You can only access live streams or recordings that meet these requirements.
For security reasons the default behavior prevents UPnP access to live streams and recorded files.
To enable UPnP, see
Some players cannot access the stream or saved recordings if a viewer password is set. If needed,
see
When browsing via UPnP your Standalone VGA Grid is displayed by the server name you set, or it's product
serial number.
For example, when browsing from a Windows computer, you will see a list of media devices that includes the
Standalone VGA Grid:
Live streams
When you open the device from Windows Media Player, you'll see a list of the available channels you can
stream under the Videos tab. The channel names are the same as they are in the admin interface. From other
digital media players, the channel list can be under a
Live Streams
folder.
With Windows Media Player, double click to open any channel and press Play to start the stream. Using your
digital media player, select a live stream and press play.
Recorded files
Recorded files are shown in the Recorded Files folder. Files are organized by the channel or recorder from
which they were recorded. Windows Media Player shows the recorder files side by side with the channels and
other digital media players show the recorded files in a file tree format, see below.
195
