Standalone VGA Grid User Guide
Record with a recorder
5. If the all channels box is selected, click it to deselect it; the other check boxes are enabled.
6. Click the check boxes for the desired channels.
Channels with no active video source are displayed in italics. You can include these channels
in your channel selections for the recorder.
7. Click Apply; the changes are reflected in the recorder configuration page.
Record with a recorder
Recorders are stopped and started via their configuration page. Multiple recorders and channel recordings can
occur concurrently.
The number of channels being recorded is displayed below the recording stop/start buttons. To configure the
channels being recorded, see
Change the channels recorded by a recorder
To start and stop recorder:
1. Connect to the admin interface using your preferred connection mechanism. See
2. Login as admin or operator.
210
