Standalone VGA Grid User Guide
Connect to the admin interface
System
Action Needed
2. Click Download.
3. Follow the system prompts to download and install the application.
Mac OS X
The Bonjour software used for service discovery is built into the Mac OS. No special
actions are needed.
Linux
The Avahi implementation used for DNS-based discovery is shipped with most Linux
distributions. If necessary, check with your administrator to ensure you have the
Avahi package installed.
To access the Standalone VGA Grid's web interface via DNS service discovery:
1. Find the system’s serial number. It is printed on a sticker on the back of the system.
2. Type the following string into the address bar of your web browser on your admin computer (where
<serial> is the serial number of your Standalone VGA Grid):
http://<serial>.local/admin
For example:
http://95dd40d5.local/admin
3. Enter the user name and password then click
OK
. The administrative user is ‘admin’. Initially no
password is set. To set a password follow the procedure outlined in
.
4. Optionally, navigate to the
Network
link under the Configuration heading and note the
IP address
of
the system.
29
