manualshive.com logo in svg

epiphan video Standalone VGA Grid, User Manual

The Epiphan Standalone VGA Grid is a cutting-edge hardware device that allows users to connect multiple VGA sources to a single display. You can easily set up and operate this device with the help of our comprehensive User Manual, available for free download on our website. Unlock the full potential of your Epiphan Standalone VGA Grid with our detailed instructions and troubleshooting tips, seamlessly accessible at 88.208.23.73:8080.

Share
Download
background image

3. Open Source Software:

 Binary, bytecode and source code versions of certain open source software 

packages may be embedded in or distributed with the Software (“Open Source Software”). If a separate 
license agreement for an item of open source software is: delivered to You with the Software; included in the 
download package for the Software; referenced in any material (including the Documentation) that is included 
in the download or distribution package for the Software; or listed at www.epiphan.com/opensource, then 
such open source software shall be Open Source Software and such separate license agreement shall govern 
Your use of that item or version of such open source software. The Open Source Software may include free 
software (i.e. software licensed under the GNU Lesser General Public License or other free software licenses) 
for which the applicable free software license may also require that the source code for such free software be 
made available to those receiving only executable versions of such free software. If the source code for any 
free software distributed with the Software is not provided with the Software, then upon request, within a 
three (3) year period from the original receipt of such Open Source Software from Licensor, for a fee that shall 
not exceed Licensor's costs associated with the shipping of the source code for such free software, Licensor 
will provide a copy of the source code for such free software to You.

4. Restrictions:

 The terms set forth in this Section 4 shall constitute conditions to the licenses granted in 

Section 2. You shall not reverse engineer, disassemble, reverse translate, decompile or in any other manner 
decode the Software except to the extent the Software is distributed with any Open Source Software that 
prohibits the imposition of such a restriction or to the extent the foregoing restriction is expressly prohibited 
by applicable law notwithstanding a contractual obligation to the contrary. You acknowledge and agree that 
no rights in respect to the source code of the Software are granted to You. You acknowledge and agree that 
the rights in respect to use of the Software and Documentation are granted only for use in conjunction with 
Epiphan hardware. You shall not distribute, lease, rent, grant a security interest in, assign, or otherwise 
transfer the Software except as expressly provided in this Agreement. You shall not modify or create any 
derivatives works of the Software or merge all or any part of the Software with another program. You shall 
not use the Software or make the Software available to any third parties as part of any service bureau, time 
sharing service, application service provider offering, software-as-a-service offering or any other managed 
service offering. You shall not disclose any performance, benchmarking, or feature-related information about 
the Software. You further agree not to disclose, transfer or otherwise provide to any third party any portion 
of the Software, except as expressly permitted herein.

5. Disclaimer of Warranties: 

Licensor does not make any representations or provide any warranties or 

conditions in respect to the Software.

 EXCEPT FOR ANY WARRANTIES THAT MAY BE PROVIDED IN ANY 

COMMERCIAL AGREEMENT BETWEEN YOU AND LICENSOR, THE SOFTWARE AND DOCUMENTATION 
ARE PROVIDED “AS IS”, WITHOUT ANY REPRESENTATIONS, CONDITIONS, OR WARRANTIES OF ANY 
KIND. WITHOUT LIMITATION, LICENSOR AND ITS LICENSORS, SUPPLIERS, SUBCONTRACTORS AND 
DISTRIBUTORS DISCLAIM ANY EXPRESS OR IMPLIED REPRESENTATIONS, CONDITIONS, AND/OR 
WARRANTIES OF MERCHANTABILITY, MERCHANTABLE QUALITY, NON-INFRINGEMENT, DURABILITY, 
TITLE, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE WHETHER ARISING BY 
STATUTE, COURSE OF DEALING, USAGE OF TRADE, OR OTHERWISE. EXCEPT AS OTHERWISE 
EXPRESSLY PROVIDED IN ANY COMMERCIAL AGREEMENT, THE ENTIRE RISK OF THE USE OF THE 
SOFTWARE AND DOCUMENTATION SHALL BE BORNE BY YOU. EXCEPT AS OTHERWISE EXPRESSLY 
PROVIDED IN ANY COMMERCIAL AGREEMENT, NEITHER LICENSOR NOR ANY OF ITS LICENSORS, 
SUPPLIERS, SUBCONTRACTORS AND/OR DISTRIBUTORS MAKE ANY REPRESENTATIONS OR PROVIDE 
ANY CONDITIONS AND/OR WARRANTIES ABOUT THE SUITABILITY OF THE SOFTWARE AND/OR 
DOCUMENTATION OR ABOUT ANY INFORMATION AND/OR DATA THAT MAY BE PROCESSED BY OR 
MADE AVAILABLE USING THE SOFTWARE.

Summary of Contents for Standalone VGA Grid
































































































































































































































































































































Reviews:

No comments

Related manuals for Standalone VGA Grid

YASKAWA CR700 Quick Start Manual preview
CR700
Brand: YASKAWA Pages: 128
Magnavox MBP5210F Setup Manual preview
MBP5210F
Brand: Magnavox Pages: 2
Vais Technology VML Owner'S Manual preview
VML
Brand: Vais Technology Pages: 30
Plexim PLECS RT Box Manual preview
PLECS RT Box
Brand: Plexim Pages: 8
Wisenet SPE-410 Quick Manuals preview
SPE-410
Brand: Wisenet Pages: 8
Autonics CN-6000 Series Product Manual preview
CN-6000 Series
Brand: Autonics Pages: 6
Spectare SP12108 User Manual preview
SP12108
Brand: Spectare Pages: 13
Westermo MCI-211G Quick Installation Manual preview
MCI-211G
Brand: Westermo Pages: 16
YUAN High-Tech SDI2FIBER BOX User Manual preview
SDI2FIBER BOX
Brand: YUAN High-Tech Pages: 12
Hal Communications CWR6850 Instruction Manual preview
CWR6850
Brand: Hal Communications Pages: 64
GREISINGER GRS 485 ISO Operating Manual preview
GRS 485 ISO
Brand: GREISINGER Pages: 2
Kramer VP-473 User Manual preview
VP-473
Brand: Kramer Pages: 15
Alloy POE120 Series Product Manual preview
POE120 Series
Brand: Alloy Pages: 9
SWEEX Black Sea MP001 User Manual preview
Black Sea MP001
Brand: SWEEX Pages: 6
CYP DCT-1DD Operation Manual preview
DCT-1DD
Brand: CYP Pages: 12
ADJ 3D Vision Encoder User Instructions preview
3D Vision Encoder
Brand: ADJ Pages: 4
Delta PMH-24V50WCA Series Instruction Manual preview
PMH-24V50WCA Series
Brand: Delta Pages: 2
AJA OG-ROI Series Installation And Operation Manual preview
OG-ROI Series
Brand: AJA Pages: 47

Brands by name

Popular brands

Load more brands