Standalone VGA Grid User Guide
Delete a channel
Delete a channel
From time to time you may want to clean up the list of channels, and remove channels that are no longer
used. The following steps describe how to delete a channel. Deleting a channel does not delete the input
source configuration, however it deletes any recorded files for the channel.
To delete a channel, follow the steps below.
1. From the web interface, scroll to the Channels menu option.
2. Click the channel you want to delete; the menu expands.
3. Click
Status
; the Status page opens displaying the service state and stream info for the channel.
4. Click
Delete this channel
; a confirmation dialog box appears to remind you that all recorded files for
this channel will be removed.
You cannot undo this command.
5. Click
OK
to continue or
Cancel
to stop. If you proceed, a message indicating that the channel was
successfully deleted appears at the top of the page.
121
