epiphan video Standalone VGA Grid User Manual Download

Page: 169 / 319

Standalone VGA Grid User Guide

Stream to a CDN

Stream to a CDN using an XML profile

Stream to Wowza Streaming Cloud

Test using Epiphan TV CDN

To stream content to a CDN using RTSP announce

1. Connect to the admin interface using your preferred connection mechanism. See

Connect to the admin

interface

2. Login as admin.

3. From the web interface, click a

Channel

; the menu expands.

4. Click

Streaming

; the channel's Streaming page opens.

5. Scroll to the

Stream to a server

section of the page.

6. Click the

Publish

drop-down menu.

7. Choose

using RTSP announce

from the drop-down menu.

8. Enter the ingestion point url provided by the CDN or media server.

9. Check the

Use TCP for RTP stream

checkbox. Verify which transport protocols your CDN provider

supports.

10. Enter a user name and password.

11.

The CDN provider assigns a user name and password to authenticate the publisher.
Contact the CDN provider for your log in credentials.

12. Click

Apply

To stream content to a CDN using RTMP push

1. Connect to the admin interface using your preferred connection mechanism. See

Connect to the admin

interface

169

Summary of Contents for Standalone VGA Grid
































































































































































































































































































































Search results

Summary of Contents for Standalone VGA Grid

Reviews:

Related manuals for Standalone VGA Grid

Brands by name

Popular brands

epiphan video Standalone VGA Grid, User Manual

Search results

Summary of Contents for Standalone VGA Grid

Reviews:

Related manuals for Standalone VGA Grid

Brands by name

Popular brands